Tuesday, July 19, 2016

Harry Potter House Necklaces


Every Marissa from Rae Gun Ramblings puts together Happy Harry Potter, a crafting and recipe series all based around Harry Potter. Some of my favorite bloggers get together and make Harry Potter tutorials in honor of Harry's upcoming birthday. It is where I get my best ideas and I look forward to it every year! This year, for part in the series, I partnered with Fizzy Pops to bring you these darling Harry Potter House Necklace. We just so happen to have one of each house in our own house, so these were perfect for our family! 


I found everything I needed for these House Necklaces from Fizzy Pops.  They have an amazing selection. Here is what I used for these necklaces. 

The Gryffindor Necklace:



First you will need to cut your wire the desired length of your necklace plus 1.5 inches on each side. My wire is 16 inches long, plus the 1.5 inches on each side, for a total of 19 inches.

Close a 6mm jump ring and slide it on the end of your wire. Loop the wire around the ring and then slide two crimp beads over both sections of wire. Use a pair of pliers to crimp the crimp beads down until they are tight and flat. You can also add an extender chain at this point, if you want to. For detailed instructions on adding an extender chain, check out the Fizzy Pops tutorial here.


After your beads are crimped. you are ready to add your necklace beads. Here are the necklace patterns.



The Gryffindor Necklace:

Burgundy
Gold Star Dust Bead
Gold Faux Pearl
Gold Star Dust Bead

(repeated 5x)

bottle cap pendant

Burgundy
Gold Star Dust Bead
Gold Faux Pearl
Gold Star Dust Bead

(repeated 5x)




The Hufflepuff Necklace:

Yellow Bead
Gold Star Dust Bead
Black Bead
Gold Star Dust Bead
Yellow Striped Bead
Gold Star Dust Bead
Black Bead
Gold Star Dust Bead
Yellow Bead
Gold Star Dust Bead
Black  Bead
Gold Star Dust Bead
YelloStriped Bead
Gold Star Dust Bead
Black Bead
Gold Star Dust Bead

bottle cap pendant
Gold Star Dust Bead
Black Bead
Gold Star Dust Bead
YelloStriped Bead
Gold Star Dust Bead
Black Bead
Gold Star Dust Bead
Yellow Bead
Gold Star Dust Bead
Black  Bead
Gold Star Dust Bead
YelloStriped Bead
Gold Star Dust Bead
Black Bead
Gold Star Dust Bead
Yellow Bead



The Ravenclaw Necklace:

Brown Faux Peal Bead
Blue Striped Bead
Blue Faux Peak Bead
Silver Star Dust Bead
(repeated 4x)

bottle cap pendant

Brown Faux Peal Bead
Blue Striped Bead
Blue Faux Peak Bead
Silver Star Dust Bead
(repeated 4x)



The Slytherin Necklace:

Silver Star Dust Bead
Green StripeBead
Silver Star Dust Bead
Ice Cube Bead 
Silver Star Dust Bead
Green StripeBead
Silver Star Dust Bead
Green Faceted Bead 
Silver Star Dust Bead
Green StripeBead
Silver Star Dust Bead
Ice Cube Bead 
Silver Star Dust Bead
Green StripeBead
Silver Star Dust Bead
Green Faceted Bead

Silver Star Dust Bead
Green StripeBead
Silver Star Dust Bead
Ice Cube Bead 
Silver Star Dust Bead

bottle cap pendant 

Silver Star Dust Bead
Green StripeBead
Silver Star Dust Bead
Green Faceted Bead 
Silver Star Dust Bead
Green StripeBead
Silver Star Dust Bead
Ice Cube Bead 
Silver Star Dust Bead
Green StripeBead
Silver Star Dust Bead
Green Faceted Bead 
Silver Star Dust Bead
Green StripeBead
Silver Star Dust Bead
Ice Cube Bead 
Silver Star Dust Bead
Green StripeBead
Silver Star Dust Bead
Green Faceted Bead

Slide a lobster clasp onto a 6mm jump ring and then close the jump ring. Slide the jump ring onto the wire and then double back the wire through the crimp beads and a couple extra of the necklace beads. Crimp the crimp beads until they are tight and then trim the excess wire.


You necklace is now ready to add the image to the center! I did a google search for each of the house crests. I cropped each crest to be about 3/4 of an inch high. Use a 1 inch circle hole punch to punch out the image after it is printed.


Place an epoxy sticker on top of the image and rubbed the back to make sure all air bubbles were gone. Add a small amount of a strong glue (like E-6000) to the bottle cap and gently press your image with epoxy sticker to the bottle cap.

Allow the glue to dry completely before wearing.

As part of Happy Harry Potter, there is an AMAZING Harry Potter themed giveaway going on right now. Enter below!


Harry Potter everything. Great book nerd gifts and book swag.
Prize Pack #1 See more about each prize and sponsor at this giveaway post and be sure to enter the other equally awesome prize pack while you're there! Winner must have a US address or be willing to pay for international shipping.
a Rafflecopter giveaway

Which house are you in?
post signature
Post a Comment